Service Calls and Repairs in Newnan, GA

Job Summary – Dedicated Circuits and Receptacle Installation 1. Dedicated Circuit for Deep Freezer Install a new dedicated electrical circuit to supply power to the customer’s deep freezer. The new circuit will provide a separate power supply for the freezer. 2. Exterior and Interior Receptacle Installation Install a new exterior receptacle supplied by a dedicated circuit. The wiring will be routed through PVC conduit down the front exterior wall, using a 90-degree bend to continue toward the center of the window. From this location, the installation will continue through the wall into the living space to supply a new interior receptacle. The wiring will then be routed back up through the wall to install an additional receptacle between the two windows. In Summary: * Install two new dedicated electrical circuits. * Provide a dedicated circuit for the customer’s deep freezer. * Install the exterior receptacle with PVC conduit routed along the front of the house. * Install the int

A severe storm caused a tree to strike the main electrical pole, disrupting power. Upon arrival, we assessed the damage and promptly contacted the power company to ensure the safety of the area. We coordinated with the power company to safely turn off the electricity, preventing potential hazards. Our team then secured the site and prepared for further repairs, ensuring minimal disruption.

Upon receiving a report of an overheating Tesla charger, I initiated a thorough inspection. The charger displayed a "Running hot" message, indicating a potential issue. I began by examining the charger's internal components, ensuring all connections were secure and free from corrosion. I then tested the temperature sensors to verify their accuracy. After confirming the sensors were functioning correctly, I cleaned the ventilation areas to ensure proper airflow. Finally, I performed a software update to address any potential firmware issues. The charger is now operating within normal parameters.

I replaced the existing interior electrical panel with a new 200-amp main breaker panel, ensuring all new UL-listed circuit breakers were installed. I reconnected existing branch circuits, properly terminating and labeling the wiring. A whole-home surge protection system was installed to safeguard the electrical system. I also installed a generator interlock kit, generator inlet, and associated wiring and circuit breaker to safely connect a portable generator. The existing upstairs bedroom ceiling fan was removed, and the ceiling junction box was replaced with a fan-rated box. The owner-supplied replacement ceiling fan was assembled and installed using existing wiring and controls. All systems were tested for proper operation.

00 AM service disconnection, including one hour of standby time. After disconnection, we removed the old mast, roof boot, and weatherhead, then installed new components, ensuring proper sealing and weatherproofing. Although the existing service entrance cable appeared undamaged, we could not confirm its condition until inspection. If damage is found, permitting and additional upgrades may be required by the utility company and county authority, including cable replacement, a new outdoor disconnect, a grounding electrode system, a surge protector, and smoke detectors. Our work concludes with preparation for utility reconnection, which is scheduled by the utility company.

Today, I installed two new GFCI-protected circuits, multiple receptacles, a lighting switch leg, and three data drops. I installed five 1900 electrical boxes, including one for the switch leg. Four boxes were fitted with 2-gang Decora-style plate covers and receptacles. The GFCI circuits were installed and tested for proper operation. The electrical panel was replaced, and a whole-home surge protector was added. I provided a temporary panel labeling sheet for the customer. Three Cat6 data drops were installed, with one in each designated bedroom and the third in the master bedroom, all tested for proper connectivity. All work was verified to be in proper working condition.

I installed two light fixtures and diagnosed an electrical circuit for the back porch. The circuit had been disconnected during a previous renovation. Using specialized equipment, I located and reconnected the circuit to the panel. After reconnecting, I tested all devices and wiring, confirming proper operation. Both damaged receptacles were replaced. The circuit is now GFCI protected and operates on a 15-amp breaker, tested and confirmed to be functioning correctly.

I addressed the intermittent flickering of the recessed lights in the kitchen by inspecting the fixtures and connections. After identifying loose wiring and a faulty dimmer switch, I replaced the faulty components and ensured all connections were secure. Additionally, I diagnosed the ground-fault outlet by testing its functionality and found a tripped circuit. I reset the circuit and confirmed the outlet was working correctly, ensuring safety and reliability in the kitchen.

Recently, I installed a comprehensive electrical setup for a customer who moved into a new place and is converting their garage into a wood shop. This involved installing multiple outlets to accommodate various tools, ensuring they are strategically placed for easy access. Additionally, I installed ceiling lighting to provide adequate illumination for the workspace. Furthermore, I completed the installation of six drops of Cat6 cabling to support their low-voltage network needs. The project was completed efficiently, ensuring all safety standards were met.

Upon receiving the call, I promptly assessed an interior electrical outlet that was malfunctioning. The cover was absent, causing the outlet to retract into the wall when a cord was plugged in. I first replaced the missing cover, ensuring it was securely fastened. Next, I inspected the wiring to confirm it was intact and properly connected. After securing the wiring, I tested the outlet multiple times to verify its functionality and safety. The job was completed efficiently, ensuring the outlet is now fully operational and safe for use.

We installed eight to ten exterior lights to enhance security and lighting around the property. Additionally, we added an outlet above the TV to facilitate the installation of a camera light system. The customer provided the necessary materials, ensuring a smooth and efficient process. Our team meticulously positioned the lights to maximize coverage and aesthetics, while the outlet installation was carefully executed to meet safety standards. This project improved both the property's security and its overall lighting.